Monday, March 30, 2020

1/144 WWII British RAF Airfield Control Tower - CGD



1/144  WWII British RAF Airfield Control Tower - CGD

This RAF Airfield Control Tower is available as upainted (2 colour camouflaged) or unpainted. Unpainted kit contains 8 parts.

Also suitable for many USAAF bases in UK during WWII

https://www.combatgroupdynamix.com/New2019/Airfield/AirfieldControlTower/AccessoryAirfieldControlTower.htmlinting-license-for-selling-printed-models

Painted: 34.90 USD
Unpainted: 19.9 USD


Assembly instructions can be downloaded here:
https://www.combatgroupdynamix.com/New2019/Airfield/AirfieldControlTower/1_144_AirfieldControlTowerAssemblyInstructions.pdf

Recommended Compatible Dio sheet
https://www.combatgroupdynamix.com/Diorama

1/144 STL - files for wargaming and modelling - Najewitz Modellbau






STL - files for wargaming and modelling -  - Najewitz Modellbau

So here is something a little different for those with access to a 3D printer!

Sets of STL files that allow you to print buildings, structures and vehicle from periods in history, for your diorama.

https://3dprintterrain.myshopify.com/


more 1/144 images on facebook
https://www.facebook.com/najewitz.modellbau

Attention !! This are STL-files, not casted models !!

Printer Settings

To make it fast, the models can be printed with a thickness of 0.3mm. However the quality increases, the lower the layers are. Also think of sufficient infill. This is because it is certain that the top print layer is opaque and smooth. We achieved the best results with the following settings:

Layer 0.2mm, infill 20%, Speed 50mm-80mm sec

But everyone knows his own printer best and try to get the desired result. Ultimately it depends on which printer you take. This can be a cheap Geetech or an expensive Ultimaker. They should all work. Scaling The models are designed to work on a scale of 20/22 mm. I recommend the following scaling


15mm to get - 73% (Cura 0.73)
28mm to get - 127% (Cura 1.27)
1:144 - 50% (Cura 0.50)
It is of course up to you how to change the size of the models.

WWII
https://3dprintterrain.myshopify.com/collections/filesets
"Cold War"
https://3dprintterrain.myshopify.com/collections/other-files
"Middle East"
https://3dprintterrain.myshopify.com/collections/arabic-middle-east-n-africa


If you wish to resell printed items
https://3dprintterrain.myshopify.com/products/printing-license-for-selling-printed-models

*** Warning: these images are not all of the 1/144 scale prints ***








Friday, March 06, 2020

1/144 "2-in-1 WWII Luftwaffe Hangar (Inside) Set" - Noys Miniatures



1/144 "2-in-1 WWII Luftwaffe Hangar (Inside) Set" - Noys Miniatures

Six 1/144 sheets as follows:
Floor Component I: 9.3 cm / 3.7 inch x 13.2 cm / 5.2 inch;
Floor Component II: 18.6 cm / 7.3 inch x 13.2 cm / 5.2 inch;
Wall Component I: 13.2 cm / 5.2 inch x 5.7 cm / 2.2 inch;
Wall Component II: 9.3 cm / 3.7 inch x 5.7 cm / 2.2 inch;
Wall Component III: 9.3 cm / 3.7 inch x 5.7 cm / 2.2 inch;
Accessory Detail Set: 7.4 cm / 2.9 inch x 5.3 cm / 2.1 inch.
Quality printed on cardstock

Pricel £20

Available : March 2020

https://www.hannants.co.uk/product/NM14442

https://www.facebook.com/pages/category/Brand/Noys-Miniatures-2233956573518784/