CGD - Combat Group Dynamix 2019 Relaunch!

CGD - Combat Group Dynamix 2019 Relaunch!

www.combatgroupdynamix.com/Opening2019/

CGD will be relaunching their site in early 2019.

New Improved shop layout 

SSL secure online shop!

New print techniques

New countries

New products

Items available: unpainted or painted

www.facebook.com/CombatGroupDynamix

SdKfz 251/20 UHU - Variant of SdKfz 251 Ausf D Schützenpanzerwagen (Infrarotscheinwerfer), mounting a 60 cm infrared searchlight with a range of 1.5 km for illuminate target at night. Used together with Panther and Nachtjäger armed with Vampir devices.

SdKfz 251 Ausf D Half-track - Update version of SdKfz 251 Ausf C, form the basis of armoured transport and 20 + different purposed vehicles. 

7.5 cm Pak 40 - 7.5 cm Panzerabwehrkanone 40 was developed by Rheinmetall from 1939 to 1941 and used by the German forces since. Some were installed on armoured cars such as SdKfz 251/22 to give it mobility From mid WWII onward, vehicle mounted version was developed (7.5 cm KwK 40) and mounted on tank and tank destroyers.

M3A1 Half-track - Widely used by Allies during WWII and beyond. Basis for variants like AA gun and mortar carriage. 

Somua S35 - French medium Cavalry tank built from 1936 to 1940. Featuring a 47 mm SA 35 gun and sloped armour. It was superior in both armament and armour to the Panzer IIIs at the time of invasion of France. About 440 vehicles were built. 

Bär Heavy Assault Gun - Conceptual design of the Bär was finished in May 1942. With a weight of 120,000 Kg but powered by a 700 hp Maybach HL 230 engine, it could only have a maximum speed of 20 km/hr. It was to carry a 305 mm (L/16) gun firing a combined round weighting 350 kg with 50 kg explosive in the warhead. Muzzle velocity was 355 m/sec, range 10,500 meters. No prototype was ever built.

1/144 Luftwaffe Ground Crew & Accessories (Set C) and He.178 V1/V2 - CGD

1/144 WWII German Luftwaffe Ground Crew Set C Maintenance and Pilots
This set contains 4 Luftwaffe ground crew in maintenance duty, 3 Luftwaffe pilots, 1 Krupp Feldkran, 1 1.2-meter ladder platform and 1 2-meter ladder platform.

Figures are modelled according to average Caucasian of height 5' 8" to 5' 10" (1.73m to 1.78m). Figure measures approximately 12mm when standing upright. Highly detailed, highly realistic and in real human proportion. NOT big headed cartoon-ish wargame figures!

Digitally mastered, the soldiers are fabricated with state of the art "3D Printing" technology in ACRYLIC RESIN. Ladder Platforms are also 3D printed with Acrylic resin. Krupp Feldkran is 3D printed with Nylon.

The resin material is like regular resin and should be handled as such.
Nylon material is durable and flexible.

Available FULLY PAINTED in European Theatre uniform Colour Scheme, or unpainted.
http://www.combatgroupdynamix.com/Diorama/WargameSeries/Soldiers/LuftwaffeGroundCrewSetCPainted.html
http://www.ebay.com/itm/1-144-WWII-German-Luftwaffe-Ground-Crew-Set-C
http://www.combatgroupdynamix.com/eShop/eShopNew.html
http://stores.ebay.com/Combat-Group-Dynamix/

1/144 Dameya X CGD Luft 46' WWII Heinkel He 178 v1 Display Model
1/144 Dameya X CGD Luft 46' WWII Heinkel He 178 v2 Display Model
These 1:144 WWII German He 178 v1 and v2 Display Models are designed by renown Japanese garage kit manufacturer Yuunagi-Dameya, and licensed to CGD for marketing. These kits are painted and assembled by CGD. It comes with detachable CGD Flight Stand which are CGD designed exclusives.

Also available is an unpainted version required assembling of wheels and canopy.
This is a easy to assembly version specially licensed to CGD and is "relatively" easier to assemble than regular Dameya products.

These aircraft are fabricated with state of the art "3D Printing" technology in ACRYLIC RESIN with exceptional detail. Flight stand is 3D printed with Nylon.

The resin material is like regular resin and should be handled as such.
Nylon material is durable and flexible.

http://www.combatgroupdynamix.com/Diorama/WargameSeries/Special/He178/Luft46He178V1.htm
http://www.ebay.com/itm/1-144-Dameya-X-CGD-Luft-46-WWII-Heinkel-He-178-v1

http://www.combatgroupdynamix.com/Diorama/WargameSeries/Special/He178/Luft46He178V2.htm
http://www.ebay.com/itm/1-144-Dameya-X-CGD-Luft-46-WWII-Heinkel-He-178-v2

http://www.combatgroupdynamix.com/eShop/eShopNew.html
http://stores.ebay.com/Combat-Group-Dynamix/

The Heinkel He 178 was the world's first aircraft to fly under turbojet power, and the first practical jet aircraft. It was a private venture by the German Heinkel company in accordance with director Ernst Heinkel's emphasis on developing technology for high-speed flight and first flew on 27 August 1939

https://en.wikipedia.org/wiki/Heinkel_He_178

Also compatible with:  with Matti's Miniatures Me-163s, Dameya's He.178 aircraft, on a CGD airfield dio, though also compatible with almost any 1/144 brand such as Kampflieger, Miniwings, Foxone or F-Toys , Tomtec, Revell etc

1/144 World Tank Museum Kit - Planned Releases

1/144 World Tank Museum Kit - Planned Releases 
The June 2013 edition of Armour Modelling magazine has an interesting feature on upcoming releases (Late 2013?). I think at this stage they will follow the recent format of WTM kits of being issued unpainted but in various colours of plastic, though if this was a return to the prepainted WTM items of old then all the better!?

Images used with permission of Dameya (Source)

It is interesting that the 8t was first spotted way back in 2006 and reported on this blog
http://kampfgruppe144.blogspot.co.uk/2006/07/takara-wtm-10-part-2.html, it would be interesting to see some of the items on that post also released one day.

While this 88mm does not have the sophistication and quality of the Strategist 88mm, it will be a more economic and could allow for some interesting customisations.

Also do not forget there are KG144 and CGD figure sets that would complement this release!

1/144 Luftwaffe Ground Crew Set A + Set B - By CGD

1/144 Luftwaffe Ground Crew Set A + Set B - By CGD
New sets of 1/144 WWII German Luftwaffe Ground Crew comprising of  Set "A" and Set "B" from the Authentic Soldiers series of CGD.


Set "A" contains: 
2x Luftwaffe ground crew pulling a bomb dolly with a 250kg bomb,
1x empty bomb dolly, and
5x SC250 bomb.

Set "B" contains:
2x Luftwaffe ground crew servicing aircraft,
1x bomb dolly loaded with 250kg bomb, and
1x ground crew pulling a bomb dolly with a SC250 bomb.

Available in PAINTED or UNPAINTED figure packs!

Figures are modelled according to average Caucasian of height 5' 8" to 5' 10" (1.73m to 1.78m). Figure measures approximately 12mm when standing upright. Highly detailed, highly realistic and in real human proportion. NOT big headed cartoon-ish wargame figures!Digitally mastered, the soldiers are fabricated with state of the art "3D Printing" technology in ACRYLIC RESIN.

TRUE 1:144 SCALE; Figure measures approximately 12mm when standing upright.


Released: November 2012
Available:  CGD eShop and CGD eBay (painted) Set 'A' Set 'B'  (unpainted) Set 'A' Set 'B'

Other CGD Authentic Figures  on request, as featured on KG144.

1/144 WWII German Panzerjäger/StuG Crew - CGD

1/144 WWII German Panzerjäger/StuG Crew(s) - CGD
This set contains 8 "Thigh Height" and 3 "Full Height" German Panzerjäger/StuG Commanders and crews in various poses, fully painted in Heer Feldgrau uniforms.

These "Thigh Height" figures are for fitting into the commander's cupola and other hatches.

The three "Full Height" figures are specifically for manning open topped tank hunters like Nashorns or Marders.

The set also come with UNPAINTED circular and rectangular hatches for conversion.

Figures thigh measures roughly 2.5mm in diameter. Using a 3mm diameter drill bit, customer can bore through existing tank hatches and replace it with open hatches.

**Figures are PAINTED. Hatches are NOT, Vehicles NOT included.**

Modelled according to average Caucasian of height 5' 8" to 5' 10" (1.73m to 1.78m). Figure measures approximately 12mm when standing upright (for full figures). Highly detailed, highly realistic and in real human proportion. NOT big headed cartoon-ish wargame figures!

Digitally mastered, the soldiers are fabricated with state of the art "3D Printing" technology in ACRYLIC RESIN.

The resin material is like regular resin and should be handled as such.

CGD web shop:
http://www.combatgroupdynamix.com/eShop/eShopNew.html

CGD eBay:
http://stores.ebay.com/Combat-Group-Dynamix/Hot-New/

1/144 WWII German Tank Crew in Combat Set - CGD

1/144  WWII German Tank Crew in Combat Set - CGD

This set contains 10 "Thigh Height" German Tank Commanders in various poses, fully painted in their well known black uniforms.

These figures are for fitting into the commander's cupola and other hatches.

The set also come with UNPAINTED circular and rectangular hatches for conversion.

Figures thigh measures roughly 2.5mm in diameter. Using a 3mm diameter drill bit, customer can bore through existing tank hatches and replace it with open hatches.

**Figures are PAINTED. Hatches are NOT, Vehicles NOT included.**

Modelled according to average Caucasian of height 5' 8" to 5' 10" (1.73m to 1.78m). Figure measures approximately 12mm when standing upright (for full figures). Highly detailed, highly realistic and in real human proportion. NOT big headed cartoon-ish wargame figures!

Digitally mastered, the soldiers are fabricated with state of the art "3D Printing" technology in ACRYLIC RESIN.

The resin material is like regular resin and should be handled as such.

CGD web shop:
http://www.combatgroupdynamix.com/eShop/eShopNew.html

CGD eBay:
http://stores.ebay.com/Combat-Group-Dynamix/Hot-New/

1/144 88mm Flak 18/36/37 Crew in Anti Tank Role (Heer) - CGD

1/144 88mm Flak 18/36/37 Crew in Anti Tank Role (Heer)  - CGD
This is a new 1:144 WWII German 88mm Flak 18/36/37 Crew in Anti Tank Role (Heer) from the new Authentic Soldiers series of CGD. This set contains 7 German 88mm Flak 18/36/37 Crews in various poses, fully painted in Heer uniforms. Accessories of 88mm shell crates, stand alone shells and spent casings included.

FINALLY, a decent crew to man your collections of "Acht-acht"!!

Modelled according to average Caucasian of height 5' 8" to 5' 10" (1.73m to 1.78m). Figure measures approximately 12mm when standing upright. Highly detailed, highly realistic and in real human proportion. NOT big headed cartoon-ish wargame figures! (Also available unpainted)

Figures are designed for operating any high profile 88mm Flak 18/36/37 guns form manufacturers like Takara (shown right), Strategist (shown left), WGS and even the VOMAG from Kampfgruppe144 when used in anti tank role.
(Spoiler: AA role figures coming soon).

Should work with any Flak 18/36/37 from other manufacturers, if they are true 1:144.

The soldiers can be assembled for use on wargame table by attaching to foot plates (Foot plates NOT provided, any plastic sheets will do), or can be used as is for dioramas.

Supplied painted as seen (some colour variation may occur)

Released: Now

Available: CGD eHome,  CGD eShop and CGD eBay

1/144 PAK-43 Gun Crew - Kampfgruppe144

Detail before painting

Shown in diorama (PAK 43 Not supplied)

1/144 PAK-43 Gun Crew - Kampfgruppe144

The first in a new range of KG144 figures, modelled according to average Caucasian of height 5' 8" to 5' 10" (1.73m to 1.78m). These figure measures approximately 12mm when standing upright. Highly detailed, highly realistic and in real human proportion. NOT big headed cartoon-ish wargame figures!

Digitally mastered, the soldiers are fabricated with state of the art "3D Printing" technology in ACRYLIC RESIN. The resin material is like regular resin and should be handled as such. Figures are designed for operating Kampfgruppe144 & CGD 88mm Pak 43 anti tank guns in all its versions, such as:

1/144 KG144 X CGD WWII German 88mm Pak 43 Crews (Heer, Painted) Set of 5 (available now!)

1/144 Kampfgruppe144 X CGD German PAK-43 (Panzerabwehrkanone 43)  (available now!)

other options:

1/144 CGD 1:144 Leichter Waffenträger 88mm Pak 43 L/71 (Ardelt I)

1/144 German 88mm Pak 43 L/71 auf sWS

1/144 CGD Waffentrager 38d with Pak Conversion Kit

The should also work along side PAK 43s from other manufacturers, if  scaled to true 1/144.

These soldiers can be assembled for use on wargame table by attaching to foot plates (Note: Foot plates NOT provided, although any plastic sheets will do), or can be used 'as is' for dioramas.

Supplied painted as seen (some colour variation may occur)

Released: Now

Available: CGD eHome,  CGD eShop and CGD eBay

1/144 Tank Depot 10x Figure Set - CGD

1/144 Tank Depot 10x Figure Set (Unpainted)- by CGD

A number of factors have led to CGD to release an interesting set of figures. The demand by modellers to have accurate scale 1/144 to enhance their dioramas, and more interesting for the whole 3D printing experience Shapeways are trailing a new "ultra fine" print medium. This has led CGD to design some figures that look like figures and not just a collection of lumps and bumps!

You will get 10 figures in an assortment of poses, designed to be used around an "armour maintenance depot", interestingly these come with detachable foot places so you can have your figure supported on its own base, or detached the figure can be attached to diorama directly (remember to paint them first!)

Note: This material provided by Shapeways makes they figure more like Resin than Plastic, and may need care when handling.

HD Images: Build Figures Gallery

Availiable: May 2011 (Limited Edition)
Price: $19.90 (via CGD Ebay)
Price: $

See CGD for more info:
http://cgi.ebay.com/1-144-CGD-WWII-German-Tank-Crew-Depot-Set-10-/270752347548

or, they can be added to a shapeways order at:
http://www.shapeways.com/model/246464/1_144_wwii_german_tank_crew___depot.html
http://www.shapeways.com/shops/combatgroupdynamix