STL - files for wargaming and modelling - - Najewitz Modellbau
So here is something a little different for those with access to a 3D printer!
Sets of STL files that allow you to print buildings, structures and vehicle from periods in history, for your diorama.
https://3dprintterrain.myshopify.com/
more 1/144 images on facebook
https://www.facebook.com/najewitz.modellbau
Attention !! This are STL-files, not casted models !!
Printer Settings
To make it fast, the models can be printed with a thickness of 0.3mm. However the quality increases, the lower the layers are. Also think of sufficient infill. This is because it is certain that the top print layer is opaque and smooth. We achieved the best results with the following settings:
Layer 0.2mm, infill 20%, Speed 50mm-80mm sec
But everyone knows his own printer best and try to get the desired result. Ultimately it depends on which printer you take. This can be a cheap Geetech or an expensive Ultimaker. They should all work. Scaling The models are designed to work on a scale of 20/22 mm. I recommend the following scaling
15mm to get - 73% (Cura 0.73)
28mm to get - 127% (Cura 1.27)
1:144 - 50% (Cura 0.50)
It is of course up to you how to change the size of the models.
WWII
https://3dprintterrain.myshopify.com/collections/filesets
"Cold War"
https://3dprintterrain.myshopify.com/collections/other-files
"Middle East"
https://3dprintterrain.myshopify.com/collections/arabic-middle-east-n-africa
If you wish to resell printed items
https://3dprintterrain.myshopify.com/products/printing-license-for-selling-printed-models
*** Warning: these images are not all of the 1/144 scale prints ***
No comments:
Post a Comment