1/144 Avia BH-1 Experimental by Vizi Models
A 3D Printed kit, previously issued in large scales.
The model represents the first version of the Beneš - Hain airplane with an Austro-Daimler engine from 1920, until the spring of 1921.
Mr. Marcel Sezemský took the same machine as a model for building a flying copy.
On his website www.avia.vyrobce.cz you can find all the information, drawings and lots of detailed photos, therefore I highly recommend visiting the site.
The model is completely made on a 3D printer. Any instant glue (e.g. Loctite) can be used for gluing the model. Classic modelling glues (Revell, Tamyia) do not work on this resin.
https://www.vizimodels.cz/avia-bh-1-exp-1/144
No comments:
Post a Comment